| Update the event clocks in the JSOC-IOC.
Schedule timed scripts for weekly calibrations
for AIA and HMI, if not already scheduled, and enter cal times in the
SDO operations calendar.
Check the SDO operations calendar
for any upcoming events or maneuvers, and make sure AIA and HMI are
prepared.
Attend the JSOC weekly meeting
at 1:30 PM PST.
|
Check that the AIA cals ran smoothly.
Check that the HMI obs-mode flat ran smoothly.
Attend the FOT weekly meeting at 10 AM PST.
|
Check that the rest of the HMI cals ran smoothly.
|
Update files on the JSOC Calendar page, including the Google calendar
|
If next week is an HMI detune week
and calibrations have not been scheduled, look up the correct time to run the detune and record it in the observer's log to assist other operators.
Write up and send out the AIA
and HMI Weekly Reports.
Upload the reports to the team pages. Early mission reports are in the
binders in the JSOC-IOC.
|