The STOL sdp_egse_limits.src is run from within sdp_change_tm_limits, and has limits on the
following mnemonics:
HMI_HRA_TABLE_PARITY_ERR
HMI_HRB_TABLE_PARITY_ERR
AIA_HRA_TABLE_PARITY_ERR
AIA_HRB_TABLE_PARITY_ERR
If these mnemonics change from 0, the limit violations will show up on the sdp
workstation event logs, which can be viewed from the H&S sites. The violations will not go through to the phones.
These mnemonics can be viewed on the DC/HRI telemetry screens: aia_dc_hri.scr and hmi_dc_hri.scr.
Dumping and Reloading
For HMI, use the STOL hmi_table_reload.src. For AIA, use the STOL aia_table_reload.src.
These are menu-based STOLs that allows the user to dump and reload any lookup or crop table in the RAM.